If you like the work I do on this blog, please consider supporting it via my Patreon.
In choosing colours for the third succubus, I wanted to includes elements from the other two to help draw them together as a group. My aim was to paint her skin as sort of a middle ground between the other two. The colour selections were darker and a little pinker than the kneeling succubus, but lighter in value than the seated succubus. The golds and blues used for clothing and accessories were used in various areas of the other figures as well.
Since I would also be painting a transparent cloth effect on this figure, I decided it was worth the time to test the colours I proposed to use, and I painted a quick experiment on one of the figures I previously used in a hair painting demonstration. The blond hair colours wern’t exactly the same recipe I used for the jewelry of the succubi, but they’re in the ballpark.
Test of skin and cloth colours for the standing succubus.
This was the easiest of the three skin tones for me to paint. I imagine that was largely due to being well in practice at that point after having painted two other similar figures. But I suspect that the fact that the midtone value of the skin was more of a middle value colour also made it easier. It’s tricky to judge highlights and keep them small enough on a very dark colour. Shadows painted on to very light value colours can easily look sloppy or unnatural, or be very challenging to achieve smooth blends with.
In doing a rough block in the main concern is where lighter and darker values are placed. It’s not meant to look smooth or perfect at this stage.
I once again decide to start with a rough block-in for the major highlights and shadows on the flesh. I do mean rough, as is probably more apparent in the close-up below. During this stage I was regularly holding the figure out at arm’s length and looking at it without magnification. I wanted to see whether the various masses of the body standing out as identifiable and looking three dimensional from a distance. I was not particularly concerned about how it looked up close at this stage.
The next stage was to go back in and refine the placement and the blending. For me this refinement step includes three elements, but it’s certainly possible to break these down into sequential steps instead of combining them if that makes it easier to manage.
Firstly, I was fine-tuning the initial block in by making a highlight a little brighter here, or shifting the placement location of a shadow, that sort of thing. If you compare the two stages, you can see that the highlights are shifted a little lower on the breasts in the refinement stage.
Secondly, I was making sure I had addressed smaller or subtler areas. This includes checking that I addressed all of the smaller shapes within a bigger one, like on the knee, which is this case is sculpted in such a way that some of the complexity of the knee bones are apparent. You can also see that the area of the bellybutton is more refined in the second stage.
Thirdly, I was smoothing out rough blending transitions by taking half-step mixes between colours and stippling them along the edges until I got the blends as smooth as I possibly could.
The face, hands, and feet are areas with a lot more detail. I worked on those after I had completed the main body areas. Partly this was just a question of time management. I knew I would be working on this over multiple painting sessions, so I concentrated on the body the first day, and the other areas the second. (The hand on the chest would also be most easily painted after the neck and upper chest area were completed) For these more detailed areas I painted a little more precisely. There was still a small amount of roughing in and refining, but I didn’t want to cake up any detail with paint or make my life too difficult, so I painted up a little more cleanly than I had on the body block in.
I had thought I would paint the transparent cloth immediately after finishing the skin, but it occurred to me it would be very tricky to paint the jewelry without getting paint on the cloth. You can just barely see it in the picture above, but she has jewelry on both ankles, and the inner leg is quite inset behind the cloth. For the non-metallic metal on this figure, I decided to use the colours I used to paint the freehanded pillow on the second succubus, which were adapted from the jewelry colours on the first succubus.
The blue cloth incorporated colours that I had used on the other figures, but I also added more of a teal blue. I had a similar issue with saturation as came up with the freehand pillow on the second succubus. I liked the value and general colour tone of several teal blues, but they all looked garish when placed next to the more subdued colours used on the figure. There are a number of different ways to desaturate colours. If you only have the budget or room for a small number of paints it is better to buy highly saturated ones and learn how to use colour mixing and colour theory to adapt them as necessary. In this situation, I chose to add one of the purplish colours used on the skin to the teal.
The photo above shows the palette of colours I used to paint the gold NMM and the teal cloth. You can see that there is not a true saturated yellow in the colours I used to paint the gold up towards the top. The teal that I picked to paint the cloth with is the blob in the far upper right. You can see how bright it looks next to everything else on the palette. Had I painted that directly on the miniature the cloth would have stood out in a way that wouldn’t look natural. It would have looked as if it existed under different lighting than the rest. The row of less saturated teal paints near the bottom are the colours I mixed using that teal that were used to paint the cloth.
The two pools at the very bottom left are glazes that I used. These were small amounts of paint to which I added a lot of medium (in this case Reaper’s brush-on sealer) to make them very transparent. I painted the heavily thinned down blue over the areas of flesh seen through the cloth to create the impression of the cloth colour acting as a filter on the skin colour. After I finished painting the blue cloth it still seemed a little more saturated than I wanted, so I painted a thin glaze of the purplish skin colour I had mixed into the pools over the whole surface to tone it down even more. That did fix the colour, but it also subdued the value of the highlights, so I painted some of those back on.
Following the picture above, I painted her hair and also did some work on the figures’ bases. I thought it would be good to take pictures of the three together to see how they work as a group.
When I took a look at the group pictures, and then compared the figures on the shelf, I felt I wasn’t sure if the standing figure ‘matched’ the other two in terms of contrast. I had painted her hair with a softer sort of texture and wanted the robe to look filmy, but overall she seemed to have less oomph than the other two. I shared the pictures with a friend who recommend that I bump up the highlights in the hair and the focal area of the skin, and also on the robe. (My helpful friend was Jen Greenwald, who also has a blog!) The other change in the later photos is that I added some glazes of colours used on the figures to the base stones to help tie those in a bit more and give them a bit more variation and visual interest.
And a look at the changes on just the standing succubus figure alone:
Below is a picture of the layer mixes I used to paint the skin of the standing succubus. The darkest two colours on the middle row were only used for lining. (I line fingers and toes with a slightly lighter value than the main lining.) The three lightest colours (including the pale green-white in the upper right) were not really used in my initial pass. I did use a tiny amount of those light values when I went back in to add in some additional highlights in the focal area. IIRC the midtone was the center pool on the bottom row.
Skin base colour: 9679 Drow Nipple Pink
Skin shadow colours: 9602 Bruised Purple, 9307 Red Liner
Skin highlight colours: 89503 Sinspawn Pink, 9282 Maggot White
Cloth base colour: 89522 Grindylow Blue desaturated by mixing in 9679 Drow Nipple Pink
Cloth shadow colour: 61127 Waveform Aquamarine desaturated by mixing in 9602 Bruised Purple (using 9077 Marine Teal would also work, or just mixing Blue Liner into the base colour), 9066 Blue Liner
Cloth highlight colour: 9282 Maggot White, 9039 Pure White
The paint colours in italics are not currently available for purchase. Waveform Aquamarine was from a licensed line of paint and thus very unlikely to be reissued. Bruised Purple is coming back, and is currently available for preorder in a Bones 5 pledge. Drow Nipple Pink was a special event colour available at a few ReaperCons. I have heard rumours it might make a reappearance someday…
Figures in this Post
The work-in-progress succubus figures are not currently for sale. They are available for preorder as part of the Bones 5 Kickstarter late pledge. Look for the Demonic Temptations add-on.